Skywash SKY-SE1 Drywash Carbon Activator with Paint Protection

Concentrated aircraft exterior cleaning activator formulated for heavier carbon, grease and operational contamination. It may be used as part of the SKY-SE1 drywash process and can be diluted with SK310 in accordance with the manufacturer’s instructions.

Applications

• Heavier carbon and grease contamination on aircraft exteriors
• Paintwork, chrome, stainless steel and aluminium
• Painted and unpainted aircraft surfaces
• Waterless cleaning where environmental runoff or turnaround time is a concern

Application method

Shake or stir before use. Apply to a clean cloth, pad or suitable sprayer and spread over a small section. Allow a short dwell time, then remove loosened contamination with a clean microfiber or cotton cloth while the surface remains moist. Allow a light haze to appear and buff with a separate clean, dry microfiber cloth. Repeat where necessary.

Manufacturer-listed standards and references

• Boeing D6-17487 Rev R
• Airbus AIMS 09-00-002-3
• AMS 1650C
• Dassault Falcon CPM and FSA corrosion-prevention references
• Textron Aviation CSPM references for Beechcraft, Cessna and Hawker models
• Bombardier models

Safety and technical documents

Current SDS and TDS documents are available through Jhears where supplied for the product. Request a quotation and state which documents your organisation requires.

Available sizes: 1 US gallon and 5 US gallons.
Part numbers: SK11304-1 and SK11304-5.

Always check the current SDS/TDS and the aircraft operator’s approved maintenance or cleaning data before use. Availability and dispatch time are confirmed after ordering. Delivery is calculated separately.